ONE 15-Amp duplex receptacle for TWO power cable connections. Available standard with a Furutech IEC AC Inlet. Best used with the Acoustic Revive Power Reference AC Cable. Or simply add the AC Connection Option to purchase the RTP-2ultimateAC which includess a 2.0m hard-wired Power Reference Cable version.... eliminating the IEC and Female AC Power connector... the audiophile purist approach.

Acoustic Revive RTP-2ultimate Aircraft Grade Duraluminum Milled Chassis...
Provides the Ultimate in Vibration Control and Noise Suppression!!!

WOW!!! The Japanese Acoustic Revive AC Power Conditioning/Power Supply Boxes have just arrived to our shores... and all I can say is that the improvement to my tweaked out reference system was simply UNFREAKINBELIEVABLE!

Power conditioners for amplifiers??? Come'on now. I have never had success using power conditioners on amplifiers... and I have tried several (Richard Gray, PurePower and PS Audio). At best, it was a sideways move... where some attributes were better... but many were worse. So I left them out.

But having talked with the Distributor at the Lotus Group... who had just received two pre-production Acoustic Revive RTP-2ultimate versions... I became intrigued and ordered two of these passive non-current limiting devices on his recommendation before I even auditioned them.

About 6-weeks later... I received two RTP-2ultimateAC hard-wired conditioners... and installed the first one on my dedicated line to my Atma-Sphere MAI Mk.3 OTL amplifiers. I powered up the system... and I was immedaitely shocked (not literally shocked)!!!

My system jumped to a whole new level... especially with respect to naturalness... inner detail... openness... quietness... quality of bass reproduction and soundstage height, width and depth.

I then immediately installed the second RTP-2ultimate AC conditioner on my front end dedicated line powering my AMR CD-77 CDP and Atma-Sphere MP3 preamplifier... and it got even better... even more natural sounding!!! I was eXtremely AMAZED!!!

The great news is that the RTPs work equally well on both power amplifiers and front-end source components!!! This is the first power conditioner product that I can wholeheartedly recommend for audio amplifiers!

The degree of naturalness is startling!!!

Acoustic Revive is now shipping the RTP-ultimate Power Conditioner/Power Supply Boxes... and while in limited supply... this in itself is cause for celebration as the previous generation RTP-evolution series was a product to be reckoned with. There are numerous key improvements in the RTP-ultimate versions which have taken a previously excellent product into the realm of the sublime.

Very infrequently a product comes along which becomes the yardstick by which all similar products must be judged regardless of cost. Such products become classics. The RTP-2, 4 and 6 have it all - good looks, rock solid construction and, most important of all, quality of sound that has an astonishing sense of rightness. I really did not think that so much subtle information could be unearthed by a passive box. As good as the RTPevolution series was, it did not prepare me for what I am hearing. Key improvements are as follows:

HEAVY-DUTY CHASSIS: Machined from a solid block of A-2017S Air-craft grade Aluminum Alloy (Super Duraluminum). Ultimate vibration control and noise supression.

ENLARGED LEGS: Chromeplated Brass-Insulators with a new material "fo.Q" which converts vibration into electric energy and then eliminates it.

RECEPTACLES: Based on the Oyaide R-1 (20A, Beryllium-copper blades).
*Thicker Silver layer & thicker Rhodium plating. *-320 degree Super-Cryogenic treatment for contacts.

INNER WIRING: Super thickness oval-PCOCC-A conductor for improved frequency response and dynamic range.

FURUTECH AC INLET: A new pressure fit (solder free) IEC inlet. Metal parts are processed by -320 degree super-cryogenic treatment.

ELECTROMAGNETIC WAVE & NOISE ABSORBER: In addition to the "Green carborundum" and "Negative-Ion generator" Tourmaline powder found in the RTPevolution series... "Natural Quartz Powder" was added in order to realize a surface activation effect by far infrared rays (which further improves the conductivity of the PCOCC-A inner conductors).

S/N ratio, dynamics, sound pressure and sense of power are in a class by themselves, as is the resolution of the most subtle details. It is highly recommended to use Acoustic Revive's best-value Power Reference AC cable in conjunction with the RTP power strips in order to realize the maximum effect of all of the above features.

In addition, Acoustic Revive has also created the RTP-2ultimateAC which is equipped with a 2.0m hard wired Power Reference AC cable (longer lengths available as a custom order), eliminating the AC inlet and Female Power cable connector... designed for the audiophile purist! While the RTP-2ultimate or RTP-2ultimateAC can be used anywhere... it is ideally suited to separate analog and digital equipment or for monoblock amplifiers.

Feel free to call me if you have any questions... or would like to get on our Acoustic Revive RTP-4ultimate/Power Reference AC cable Demo list (on a first come first serve basis).

Xtreme AV is so confident about the performance of the amazing Acoustic Revive RTP ultimate Power Conditioner/Power Distribution Boxes... that we offer a 14-Day Money-back GUARANTEE (not including shipping... provided the product is returned in as new condition).

As an authorized Acoustic Revive Dealer... I can get any Acoustic Revive products you desire!!!

Click Here to go to the Acoustic Revive Website Home Page

Click Here to go to the Acoustic Revive RTP-ultimate Power Conditioner/Power Supply Box Webpage

Click Here to learn about the Acoustic Revive Power Reference Power Cable